Name: Magnetic Pump Filling Machine (6-Head)
Brand: PakFill
Availability: InStock

Question 1

What is the filling speed of the PakFill Magnetic Pump Filling Machine (6-Head)?

Accepted Answer

Magnetic Pump Filling Machine (6-Head) is designed for 2,000-4,000 BPH, which makes it a practical filling machine option for essential oil, e-liquid, serum, and sample bottle lines. Real output still depends on container size, product behavior, cap or label presentation where relevant, and changeover frequency, but the published speed window gives buyers a realistic planning reference for equipment sizing and line-balance review.

Question 2

How accurate is the Magnetic Pump Filling Machine (6-Head)?

Accepted Answer

Magnetic Pump Filling Machine (6-Head) is rated at ±0.5% filling accuracy under the specified product and container conditions. In actual production, repeatability still depends on stable product supply, correct nozzle setup, and consistent container presentation, but this rating gives buyers a practical baseline when comparing machine fit, process risk, and expected performance on the line.

Question 3

What containers can the Magnetic Pump Filling Machine (6-Head) handle?

Accepted Answer

Magnetic Pump Filling Machine (6-Head) supports small bottle, vial, dropper bottle. Buyers should still confirm neck finish, bottle stability, foam behavior, and change-part requirements before final quotation, especially if the line must run several container sizes or irregular packs on the same filler. PakFill can also review sample bottles to confirm transfer stability and nozzle suitability before production release.

Question 4

What fill volumes does the Magnetic Pump Filling Machine (6-Head) support?

Accepted Answer

The supported filling range is 30-500 ml. That window covers the standard fill sizes this model is intended to run, but final suitability still depends on product viscosity, foaming behavior, and bottle geometry. If your target volume sits near the ends of the range or you plan multiple SKU sizes, PakFill can confirm the most stable configuration.

Question 5

What control system does the Magnetic Pump Filling Machine (6-Head) use?

Accepted Answer

Magnetic Pump Filling Machine (6-Head) uses a Siemens PLC with Festo pneumatics and Schneider electrical components. That gives buyers a familiar industrial automation stack for recipes, alarms, and routine operation, while also making the machine easier to position inside larger filling, capping, or labeling projects that may later need line integration and export documentation.

Question 6

What products is the Magnetic Pump Filling Machine (6-Head) suitable for?

Accepted Answer

This filling machine is suited to essential oil, e-liquid, serum, and sample bottle applications. The actual match still depends on product flow behavior, container format, closure or label requirements, and downstream packaging scope, but the listed applications show the operating window the machine was designed around. Buyers with unusual formulas, fragile packages, or multi-SKU projects can contact PakFill for a custom configuration review.

Frame Material	304 Stainless Steel
Contact Part Material	316L Stainless Steel
PLC Brand	Siemens
Pneumatic Brand	Festo
Electrical Brand	Schneider
Power Supply	220V / 50Hz
Air Pressure	0.4-0.6 MPa
Production Capacity	2,000-4,000 BPH
Filling Accuracy	+/-0.5%
Heads / Stations	6
Filling Range	30-500 ml
Filling Principle	Magnetic pump filling
Applicable Container	small bottle, vial, dropper bottle
Power Consumption	1.8
Dimensions (L x W x H)	1,900x1,100x1,720 mm
Weight	320 kg

Frame Material	304 Stainless Steel
Contact Part Material	316L Stainless Steel
PLC Brand	Siemens
Pneumatic Brand	Festo
Electrical Brand	Schneider
Power Supply	220V / 50Hz
Air Pressure	0.4-0.6 MPa
Production Capacity	2,000-4,000 BPH
Filling Accuracy	+/-0.5%
Heads / Stations	6
Filling Range	30-500 ml
Filling Principle	Magnetic pump filling
Applicable Container	small bottle, vial, dropper bottle
Power Consumption	1.8
Dimensions (L x W x H)	1,900x1,100x1,720 mm
Weight	320 kg

Magnetic Pump Filling Machine (6-Head)

Magnetic Pump Filling Machine (6-Head)

Request quote or specification sheet

Technical Specifications

Built for industrial packaging work

Siemens PLC

Festo Pneumatics

316L Contact Parts

CE Ready Build

More from Pump Fillers

Servo Pump Filling Machine (4-Head)

Peristaltic Pump Filling Machine (8-Head)

Ready to automate your production?

Magnetic Pump Filling Machine (6-Head)

Magnetic Pump Filling Machine (6-Head)

Request quote or specification sheet

Technical Specifications

Built for industrial packaging work

Siemens PLC

Festo Pneumatics

316L Contact Parts

CE Ready Build

More from Pump Fillers

Servo Pump Filling Machine (4-Head)

Peristaltic Pump Filling Machine (8-Head)