Name: Machine de remplissage de pompe servo (4 têtes)
Brand: PakFill
Availability: InStock

Question 1

What is the filling speed of the PakFill Servo Pump Filling Machine (4-Head)?

Accepted Answer

Servo Pump Filling Machine (4-Head) is designed for 1,500-3,000 BPH, which makes it a practical filling machine option for detergent, oil, syrup, and sanitizer lines. Real output still depends on container size, product behavior, cap or label presentation where relevant, and changeover frequency, but the published speed window gives buyers a realistic planning reference for equipment sizing and line-balance review.

Question 2

How accurate is the Servo Pump Filling Machine (4-Head)?

Accepted Answer

Servo Pump Filling Machine (4-Head) is rated at ±0.5% filling accuracy under the specified product and container conditions. In actual production, repeatability still depends on stable product supply, correct nozzle setup, and consistent container presentation, but this rating gives buyers a practical baseline when comparing machine fit, process risk, and expected performance on the line.

Question 3

What containers can the Servo Pump Filling Machine (4-Head) handle?

Accepted Answer

Servo Pump Filling Machine (4-Head) supports bottle, jerry can, jar. Buyers should still confirm neck finish, bottle stability, foam behavior, and change-part requirements before final quotation, especially if the line must run several container sizes or irregular packs on the same filler. PakFill can also review sample bottles to confirm transfer stability and nozzle suitability before production release.

Question 4

What fill volumes does the Servo Pump Filling Machine (4-Head) support?

Accepted Answer

The supported filling range is 50-2,500 ml. That window covers the standard fill sizes this model is intended to run, but final suitability still depends on product viscosity, foaming behavior, and bottle geometry. If your target volume sits near the ends of the range or you plan multiple SKU sizes, PakFill can confirm the most stable configuration.

Question 5

What control system does the Servo Pump Filling Machine (4-Head) use?

Accepted Answer

Servo Pump Filling Machine (4-Head) uses a Siemens PLC with Festo pneumatics and Schneider electrical components. That gives buyers a familiar industrial automation stack for recipes, alarms, and routine operation, while also making the machine easier to position inside larger filling, capping, or labeling projects that may later need line integration and export documentation.

Question 6

What products is the Servo Pump Filling Machine (4-Head) suitable for?

Accepted Answer

This filling machine is suited to detergent, oil, syrup, and sanitizer applications. The actual match still depends on product flow behavior, container format, closure or label requirements, and downstream packaging scope, but the listed applications show the operating window the machine was designed around. Buyers with unusual formulas, fragile packages, or multi-SKU projects can contact PakFill for a custom configuration review.

Matériau du cadre	304 Stainless Steel
Matériau de la pièce de contact	316L Stainless Steel
Marque d'automate	Siemens
Marque pneumatique	Festo
Marque électrique	Schneider
Alimentation	380V / 50Hz
Pression d’air	0.4-0.6 MPa
Capacité de production	1,500-3,000 BPH
Précision de remplissage	+/-0.5%
Têtes / Stations	4
Plage de remplissage	50-2,500 ml
Principe de remplissage	Servo pump filling
Contenant Compatible	bottle, jerry can, jar
Consommation électrique	2.6
Dimensions (L x l x H)	2,050x1,200x1,860 mm
Poids	470 kg

Matériau du cadre	304 Stainless Steel
Matériau de la pièce de contact	316L Stainless Steel
Marque d'automate	Siemens
Marque pneumatique	Festo
Marque électrique	Schneider
Alimentation	380V / 50Hz
Pression d’air	0.4-0.6 MPa
Capacité de production	1,500-3,000 BPH
Précision de remplissage	+/-0.5%
Têtes / Stations	4
Plage de remplissage	50-2,500 ml
Principe de remplissage	Servo pump filling
Contenant Compatible	bottle, jerry can, jar
Consommation électrique	2.6
Dimensions (L x l x H)	2,050x1,200x1,860 mm
Poids	470 kg

Machine de remplissage de pompe servo (4 têtes)

Machine de remplissage de pompe servo (4 têtes)

Demander un devis ou une fiche technique

Spécifications Techniques

Conçu pour les travaux d'emballage industriel

Siemens PLC

Festo Pneumatics

316L Contact Parts

Construction prête pour la CE

Plus de Remplisseurs de pompe

Machine de remplissage à pompe magnétique (6 têtes)

Machine de remplissage à pompe péristaltique (8 têtes)

Prêt à automatiser votre production ?

Machine de remplissage de pompe servo (4 têtes)

Machine de remplissage de pompe servo (4 têtes)

Demander un devis ou une fiche technique

Spécifications Techniques

Conçu pour les travaux d'emballage industriel

Siemens PLC

Festo Pneumatics

316L Contact Parts

Construction prête pour la CE

Plus de Remplisseurs de pompe

Machine de remplissage à pompe magnétique (6 têtes)

Machine de remplissage à pompe péristaltique (8 têtes)