Name: Machine de remplissage de liquide automatique (4 têtes)
Brand: PakFill
Availability: InStock

Question 1

What is the filling speed of the PakFill Automatic Liquid Filling Machine (4-Head)?

Accepted Answer

Automatic Liquid Filling Machine (4-Head) is designed for 2,000-4,000 BPH, which makes it a practical filling machine option for water, juice, edible oil, and daily chemical lines. Real output still depends on container size, product behavior, cap or label presentation where relevant, and changeover frequency, but the published speed window gives buyers a realistic planning reference for equipment sizing and line-balance review.

Question 2

How accurate is the Automatic Liquid Filling Machine (4-Head)?

Accepted Answer

Automatic Liquid Filling Machine (4-Head) is rated at ±1% filling accuracy under the specified product and container conditions. In actual production, repeatability still depends on stable product supply, correct nozzle setup, and consistent container presentation, but this rating gives buyers a practical baseline when comparing machine fit, process risk, and expected performance on the line.

Question 3

What containers can the Automatic Liquid Filling Machine (4-Head) handle?

Accepted Answer

Automatic Liquid Filling Machine (4-Head) supports PET bottle, HDPE bottle, jerry can. Buyers should still confirm neck finish, bottle stability, foam behavior, and change-part requirements before final quotation, especially if the line must run several container sizes or irregular packs on the same filler. PakFill can also review sample bottles to confirm transfer stability and nozzle suitability before production release.

Question 4

What fill volumes does the Automatic Liquid Filling Machine (4-Head) support?

Accepted Answer

The supported filling range is 100-1,000 ml. That window covers the standard fill sizes this model is intended to run, but final suitability still depends on product viscosity, foaming behavior, and bottle geometry. If your target volume sits near the ends of the range or you plan multiple SKU sizes, PakFill can confirm the most stable configuration.

Question 5

What control system does the Automatic Liquid Filling Machine (4-Head) use?

Accepted Answer

Automatic Liquid Filling Machine (4-Head) uses a Siemens PLC with Festo pneumatics and Schneider electrical components. That gives buyers a familiar industrial automation stack for recipes, alarms, and routine operation, while also making the machine easier to position inside larger filling, capping, or labeling projects that may later need line integration and export documentation.

Question 6

What products is the Automatic Liquid Filling Machine (4-Head) suitable for?

Accepted Answer

This filling machine is suited to water, juice, edible oil, and daily chemical applications. The actual match still depends on product flow behavior, container format, closure or label requirements, and downstream packaging scope, but the listed applications show the operating window the machine was designed around. Buyers with unusual formulas, fragile packages, or multi-SKU projects can contact PakFill for a custom configuration review.

Matériau du cadre	304 Stainless Steel
Matériau de la pièce de contact	316L Stainless Steel
Marque d'automate	Siemens
Marque pneumatique	Festo
Marque électrique	Schneider
Alimentation	380V / 50Hz
Pression d’air	0.5-0.7 MPa
Capacité de production	2,000-4,000 BPH
Précision de remplissage	+/-1%
Têtes / Stations	4
Plage de remplissage	100-1,000 ml
Principe de remplissage	Inline servo liquid filling
Contenant Compatible	PET bottle, HDPE bottle, jerry can
Consommation électrique	2.5
Dimensions (L x l x H)	2,000x1,200x1,800 mm
Poids	450 kg

Matériau du cadre	304 Stainless Steel
Matériau de la pièce de contact	316L Stainless Steel
Marque d'automate	Siemens
Marque pneumatique	Festo
Marque électrique	Schneider
Alimentation	380V / 50Hz
Pression d’air	0.5-0.7 MPa
Capacité de production	2,000-4,000 BPH
Précision de remplissage	+/-1%
Têtes / Stations	4
Plage de remplissage	100-1,000 ml
Principe de remplissage	Inline servo liquid filling
Contenant Compatible	PET bottle, HDPE bottle, jerry can
Consommation électrique	2.5
Dimensions (L x l x H)	2,000x1,200x1,800 mm
Poids	450 kg

Machine de remplissage de liquide automatique (4 têtes)

Machine de remplissage de liquide automatique (4 têtes)

Demander un devis ou une fiche technique

Spécifications Techniques

Conçu pour les travaux d'emballage industriel

Siemens PLC

Festo Pneumatics

316L Contact Parts

Construction prête pour la CE

Plus de Machines de remplissage de liquides

CGF 3-in-1 Machine de remplissage d'eau (12 000 BPH)

Machine de remplissage de jus à chaud (18 000 BPH)

Machine de remplissage d'huile comestible à cellule de charge (6 têtes)

Prêt à automatiser votre production ?

Machine de remplissage de liquide automatique (4 têtes)

Machine de remplissage de liquide automatique (4 têtes)

Demander un devis ou une fiche technique

Spécifications Techniques

Conçu pour les travaux d'emballage industriel

Siemens PLC

Festo Pneumatics

316L Contact Parts

Construction prête pour la CE

Plus de Machines de remplissage de liquides

CGF 3-in-1 Machine de remplissage d'eau (12 000 BPH)

Machine de remplissage de jus à chaud (18 000 BPH)

Machine de remplissage d'huile comestible à cellule de charge (6 têtes)