Name: Lejía y masilla corrosiva ácida (8 cabezales)
Brand: PakFill
Availability: InStock

Question 1

What is the filling speed of the PakFill Bleach and Acid Corrosive Filler (8-Head)?

Accepted Answer

Bleach and Acid Corrosive Filler (8-Head) is designed for 3,000-5,000 BPH, which makes it a practical filling machine option for bleach, hydrochloric acid, alkaline cleaner, and toilet cleaner lines. Real output still depends on container size, product behavior, cap or label presentation where relevant, and changeover frequency, but the published speed window gives buyers a realistic planning reference for equipment sizing and line-balance review.

Question 2

How accurate is the Bleach and Acid Corrosive Filler (8-Head)?

Accepted Answer

Bleach and Acid Corrosive Filler (8-Head) is rated at ±0.8% filling accuracy under the specified product and container conditions. In actual production, repeatability still depends on stable product supply, correct nozzle setup, and consistent container presentation, but this rating gives buyers a practical baseline when comparing machine fit, process risk, and expected performance on the line.

Question 3

What containers can the Bleach and Acid Corrosive Filler (8-Head) handle?

Accepted Answer

Bleach and Acid Corrosive Filler (8-Head) supports large chemical bottle, HDPE bottle, jerry can. Buyers should still confirm neck finish, bottle stability, foam behavior, and change-part requirements before final quotation, especially if the line must run several container sizes or irregular packs on the same filler. PakFill can also review sample bottles to confirm transfer stability and nozzle suitability before production release.

Question 4

What fill volumes does the Bleach and Acid Corrosive Filler (8-Head) support?

Accepted Answer

The supported filling range is 500-5,000 ml. That window covers the standard fill sizes this model is intended to run, but final suitability still depends on product viscosity, foaming behavior, and bottle geometry. If your target volume sits near the ends of the range or you plan multiple SKU sizes, PakFill can confirm the most stable configuration.

Question 5

What control system does the Bleach and Acid Corrosive Filler (8-Head) use?

Accepted Answer

Bleach and Acid Corrosive Filler (8-Head) uses a Siemens PLC with Festo pneumatics and Schneider electrical components. That gives buyers a familiar industrial automation stack for recipes, alarms, and routine operation, while also making the machine easier to position inside larger filling, capping, or labeling projects that may later need line integration and export documentation.

Question 6

What products is the Bleach and Acid Corrosive Filler (8-Head) suitable for?

Accepted Answer

This filling machine is suited to bleach, hydrochloric acid, alkaline cleaner, and toilet cleaner applications. The actual match still depends on product flow behavior, container format, closure or label requirements, and downstream packaging scope, but the listed applications show the operating window the machine was designed around. Buyers with unusual formulas, fragile packages, or multi-SKU projects can contact PakFill for a custom configuration review.

Material del marco	304 Stainless Steel with isolated fluid path
Material de la pieza de contacto	PVDF, PTFE, PP, and 316L support parts
Marca PLC	Siemens
Marca neumática	Festo
Marca eléctrica	Schneider
Fuente de alimentación	380V / 50Hz
Presión de aire	0.5-0.7 MPa
Capacidad de producción	3,000-5,000 BPH
Precisión de llenado	+/-0.8%
Cabezales / Estaciones	8
Rango de llenado	500-5,000 ml
Principio de llenado	Corrosion-resistant inline filling
Material de la pieza mojada	PVDF, PTFE, and PP wetted parts
Contenedor aplicable	large chemical bottle, HDPE bottle, jerry can
Consumo de energía	4.1
Dimensiones (largo x ancho x alto)	2,450x1,380x1,980 mm
Peso	760 kg

Material del marco	304 Stainless Steel with isolated fluid path
Material de la pieza de contacto	PVDF, PTFE, PP, and 316L support parts
Marca PLC	Siemens
Marca neumática	Festo
Marca eléctrica	Schneider
Fuente de alimentación	380V / 50Hz
Presión de aire	0.5-0.7 MPa
Capacidad de producción	3,000-5,000 BPH
Precisión de llenado	+/-0.8%
Cabezales / Estaciones	8
Rango de llenado	500-5,000 ml
Principio de llenado	Corrosion-resistant inline filling
Material de la pieza mojada	PVDF, PTFE, and PP wetted parts
Contenedor aplicable	large chemical bottle, HDPE bottle, jerry can
Consumo de energía	4.1
Dimensiones (largo x ancho x alto)	2,450x1,380x1,980 mm
Peso	760 kg

Lejía y masilla corrosiva ácida (8 cabezales)

Lejía y masilla corrosiva ácida (8 cabezales)

Solicitar cotización o hoja de especificaciones

Especificaciones Técnicas

Diseñado para trabajos de embalaje industrial

PLC Siemens

Neumática Festo

Piezas de contacto 316L

Construcción lista para CE

Más de Rellenos corrosivos

Máquina de llenado anticorrosión (4 cabezales)

¿Listo para automatizar su producción?

Lejía y masilla corrosiva ácida (8 cabezales)

Lejía y masilla corrosiva ácida (8 cabezales)

Solicitar cotización o hoja de especificaciones

Especificaciones Técnicas

Diseñado para trabajos de embalaje industrial

PLC Siemens

Neumática Festo

Piezas de contacto 316L

Construcción lista para CE

Más de Rellenos corrosivos

Máquina de llenado anticorrosión (4 cabezales)